Dave Smith Instruments

Prophet ’08 Desktop

Synthesizer, Sequencer

Main Details
Maker Dave Smith Instruments Brand
Function
Channels/Tracks
  • 8 Voice
Form Factor Desktop / 19" Rackmount Convertible
Signal Path Hybrid Analog / Digital Hardware
Notes The Prophet ’08 Synthesizer Module is a tabletop “knobby” module with all of the features and controls of the Prophet ’08 Keyboard (minus the keyboard, of course) in an even more compact enclosure. With real analog oscillators, famed Curtis low-pass filters, and analog VCAs, the Prophet ’08 is capable of reproducing the familiar sounds of its legendary predecessors. But modern features like a greatly expanded modulation matrix and additional modulation sources—including three envelopes and four LFOs per voice—take it way beyond vintage gear and make it a worthy and unique addition to the Prophet family tree.

Features include a gated 16 x 4 step sequencer, arpeggiator, split or stacked key modes with separate stereo outputs per layer, and rack ears for optional rack-mounting. The Prophet ’08 module can also be used as an expander to increase the polyphony of another Prophet ’08—keyboard or module—to 16 voices.

Full-featured polysynth with a 100% analog signal path.
Classic, real analog sound—including legendary Curtis analog low-pass filters—married to a modern feature set.
Small footprint, huge sound.
Tons of knobs for direct, real-time editing and performance.
Used as an expander, increases polyphony of another Prophet ’08 to 16 voices.

OSCILLATORS
2 digitally controlled analog oscillators (DCOs) per voice with selectable sawtooth, triangle, saw/triangle mix, and pulse waves (with pulse-width modulation)
Glide (portamento): separate rates per oscillator
White noise generator
Analog VCAs
Hard sync
Filters

1 analog Curtis low-pass filter per voice, selectable 2- and 4-pole operation (self-resonating in 4-pole mode).
ENVELOPES
3 envelope generators: filter, VCA, and assignable (four-stage ADSR + delay); Envelope 3 can loop.
SEQUENCER
16 x 4 gated step sequencer
LFOS
4 LFO’s with key sync per LFO
MODULATION
4 x 2 modulation matrix with 20 mod sources and 43 mod destinations
ARPEGGIATOR
Programmable arpeggiator with up, down, up+down, random, assign modes.
Re-latching arpeggiation
CONTROLS
52 knobs and 22 buttons enable deep and comprehensive editing with little to no menu diving.
Spring-loaded pitch wheel and assignable mod wheel
MEMORY
256 fully editable Programs (2 banks of 128) with 2 Layers (2 separate sounds) in each Program.
IN/OUT
MIDI In, Out, Thru, and Poly Chain
Main stereo audio output: 1/4″ unbalanced
Output B stereo audio output: 1/4″ unbalanced
Sustain pedal input: accepts normally on or normally off momentary footswitch.
Pedal/CV input: responds to expression pedals or control voltages ranging from 0 to 5 VDC (protected against higher or negative voltages).
Headphone output: 1/4″ stereo phone jack.
POWER
Includes power supply for 110V – 240V AC operation (13-15 VDC, 400 mA) and operation manual.
PHYSICAL SPECS
Oiled walnut wood end panels
Dimensions: 3.25″ H X 18.5″ L x 7″ W (8.25 cm x 47 cm x 17.8 cm)
Weight: 8.5 lbs. (3.86 kg)
Rack mounted: 4U*
*The input and output jacks are on the back panel, so they are on top when the module is rack mounted. The jacks are recessed about 1″ but we recommend using cables with angled MIDI and audio plugs to avoid interfering with the rack space above the module.

Comments

There are no comments... Yet!
Login or Register to post a comment