Akai

AA-1030

Receiver

Main Details
Maker Akai Brand
Function
Form Factor Standard Width
Signal Path Analog Hardware
Made In Japan
Date Produced 1976 - 1979
Dimensions 440 x 140 x 350 mm
Weight 13kg
Power Source 120V, 60Hz (CSA, UL and LA Models) - 220V, 50Hz (SEV and CEE Models) - 110V/220V/240V - Switchable (Other Models)
Frequency Response 20Hz to 20kHz
Additional Specifications
AMPLIFIER SECTION : Channel Separation (IHF) >55dB (at 1kHz) Phono
AMPLIFIER SECTION : Continuous Power Output From 20Hz to 20kHz 30 W per channel (8 ohms) (Both Channels Driven)
AMPLIFIER SECTION : Continuous Power Output at 1kHz 40 W per channel (8 ohms) (Both Channels Driven)
AMPLIFIER SECTION : Continuous Power Output at 1kHz 50 W per channel (4 ohms) (Both Channels Driven)
AMPLIFIER SECTION : Filter (High) -8dB (10kHz)
AMPLIFIER SECTION : Filter (Low) -8dB (50Hz)
AMPLIFIER SECTION : Input Sensitivity / Impedance 150mV/80kΩ Aux, Tape1, Tape2
AMPLIFIER SECTION : Input Sensitivity / Impedance 3mV/50kΩ Phono1, Phono2
AMPLIFIER SECTION : Loudness Contour +10dB (100Hz), +6dB (10kHz) Volume control set at -30dB position
AMPLIFIER SECTION : Power Bandwidth (IHF) 10Hz to 60kHz 8 ohms
AMPLIFIER SECTION : Signal to Noise Ratio (IHF) >90dB Aux
AMPLIFIER SECTION : Signal to Noise Ratio (IHF) >80dB Phono
AMPLIFIER SECTION : Tone Control (Bass) +-10dB (100Hz)
AMPLIFIER SECTION : Tone Control (Treble) +-10dB (10kHz)
FM TUNER SECTION : Antenna Input Impedance 300 and 75Ω
FM TUNER SECTION : Capture Ratio (IHF) : 1.5 dB
FM TUNER SECTION : FM Muting Variable (2μV to 100μV
FM TUNER SECTION : FM Stereo Separation Better than 40 dB (1000 Hz)
FM TUNER SECTION : Frequency Range 535 kHz to 1605 kHz
FM TUNER SECTION : Harmonic Distortion (Monaural) < 0.2%
FM TUNER SECTION : Harmonic Distortion (Stereo) < 0.4%
FM TUNER SECTION : IF Rejection Better than 90 dB at 98 MHz
FM TUNER SECTION : Image Rejection Better than 65 dB at 98 MHz
FM TUNER SECTION : Selectivity (IHF) Better than 70 dB at 98 MHz
FM TUNER SECTION : Sensitivity (IHF) 1,9μV
FM TUNER SECTION : Signal To Noise Ratio Better than 70 dB
FM TUNER SECTION : Spurious Rejection Better than 70 dB at 98 MHz
AM TUNER SECTION : Frequency Range 535 kHz to 1605 kHz
AM TUNER SECTION : IF Rejection Better than 45dB at 1000kHz
AM TUNER SECTION : Image Rejection Better than 55dB at 1000kHz
AM TUNER SECTION : MW Distortion <0.6%
AM TUNER SECTION : Selectivity (IHF) Better than 30dB at 1000kHz
AM TUNER SECTION : Sensivity (IHF) 200μV/m Bar Antenna
AM TUNER SECTION : Sensivity (IHF) 5μV/m Ext. Antenna
GENERAL : Semi-conductors 1 FET, 33 Transistors, 15 Diodes, 3 ICs
STANDARD ACCESSORIES : FM Di-pole Antenna 1
STANDARD ACCESSORIES : Fuses 1 set Not with CSA, UL, LA, CEE and SEV models
STANDARD ACCESSORIES : Operator's Manual 1
STANDARD ACCESSORIES : Shorting Plug 1

Comments

There are no comments... Yet!
Login or Register to post a comment on this .