Genesis Advanced Technologies

G3.2

Speaker

Main Details
Maker Genesis Advanced Technologies Brand Arnie Nudell Designer
Function
Additional Model ID Genesis 3.2
Form Factor Floorstanding
Signal Path Analog Hardware
Made In United States
Date Produced 2006
Dimensions
(H × W × D)
Weight 232lbs
Frequency Response 16Hz-36kHz ±3dB
Notes Prototyped in 2006, release delayed until at least 2008 after Nudell's departure from Genesis. Unclear if model went into production.
Additional Specifications
Tweeter (Front) 1" Circular Quasi-Ribbon/Planar-Magnetic (Single Ended) (x8) Aluminum trace, Kapton backing
Tweeter (Rear) 1" Circular Quasi-Ribbon/Planar-Magnetic (Single Ended) (x1) Aluminum trace, Kapton backing
Midrange 25" Quasi-Ribbon/Planar-Magnetic (Push-Pull) Aluminum trace, Kapton backing
Mid-Bass Coupler (Front) 6.5" Aluminum Cone Woofer
Mid-Bass Coupler (Rear) 6.5" Aluminum Cone Woofer
Bass (Sides) 12" Ribbed Aluminum woofer (x2) Servo-controlled
Input Sensitivity 90dB/W/m
Input Impedance
Bass Amplification 1000W (x2)
Recommended Power (Tube) (Min/Max) 60W/500W
Recommended Power (Solid State) (Min/Max) 100W/1000W
Finish Grey Corian shield with: Arctic Silver, Sunrise Orange or Passion Purple body
Connections
Input
Connector: Binding Post
Controls
Parameter: Low Pass (Servo Amplifier)
Parameter: Gain (Servo Amplifier)
Parameter: LFE Gain (Servo Amplifier)
Parameter: Tweeters
Control Type: Rotary Pot
Range: ±1dB
Parameter: Midrange Level
Control Type: Rotary Pot
Range: ±0.75dB

Comments

There are no comments... Yet!
Login or Register to post a comment