Naim Audio

Nait

Amplifier, Integrated

Main Details
Maker Naim Audio Brand
Function
Channels/Tracks
  • 3 × Channel (Stereo Input)
  • 1 × Channel (Stereo Out (Tape))
  • 1 × Channel (Stereo Out (Loadspeaker))
Form Factor Half-Width
Signal Path Analog Hardware
Made In UK
Date Produced 1983-1988
Dimensions 205 x 76 x 276 mm 8 x 3 x 11 in
Power Source 120V AC, 240V AC according to makret. Integrated cable and plug.
Notes Power, frequency response, etc. specifications were not published. Manual states:
"Low continuous power output is balanced by a very large peak current capacity, so there are no restrictions on the size and type of loudspeakers that may be used. But please don't expect the impossible."
Originally sourced with red LED to indicate power on; switched to green LED in 1985.
Additional Specifications
Input Sensitivity Phono (Moving Magnet) 2.5mV, 47k Ohm
Input Sensitivity Tuner, Tape 75mV, 47k Ohm
Output Sensitivity Tape 75mV, 1k Ohm
Displays/Indicators
Red LED (early models), Green LED (late models) Power On
Connections
Tape In/Out DIN 5 Way
Tuner In DIN 5 Way
Phono In RCA (Phono, Cinch)
Phono Eartth Binding Post
Output L/R Banana Socket (Female)
Controls
Parameter: Volume
Control Type: Rotary Pot
Parameter: Balance
Control Type: Rotary Pot
Range: -3dB on left channel ONLY.
Parameter: Source Selection
Control Type: Latching Push Switch
Range: Phono, Tuner, Tape
Parameter: Power
Control Type: Latching Push Switch

Comments

There are no comments... Yet!
Login or Register to post a comment