Yamaha

CX-1000

Amplifier, Pre

Main Details
Maker Yamaha Company
Function
Channels/Tracks
  • 2 × Channel (Stereo)
Form Factor Component - Cable
Signal Path Hybrid Analog / Digital Hardware
Made In Japan
Date Produced 1987-1992
Dimensions 435 x 130 x 400mm
Weight 11.5kg
Power Source 120vac
Frequency Response 20Hz to 20kHz
Notes The CX-1000 is capable of accepting both analog and digital signals from components.

Digital connections may be made by either coaxial connections or optical fibre connections.

Automatic detection of the data rate is performed, using the Hi-Bit technology system, with an 18-bit filtering system and 8 times oversampling, dramatically reducing the possibility of digital 'dropout'.

Any sampling noise is boosted by the three stage filtering process to frequencies so far above the music that there is virtually no chance of it interfering with your listening pleasure.

Excellent linearity is achieved by use of the Hi-Bit twin D/A converters, using a floating system to shift low-level signals away from the area of most likely converter error.

Direct output from the D/A converters results in a pure sound amazingly close to the original.
Additional Specifications
Input sensitivity: 0.1mV (MC), 2.5mV (MM), 150mV (line)
Signal to noise ratio: 91dB (MC), 95dB (MM), 106dB (line)
Channel separation: 70dB (MM), 70dB (line)
Output: 150mV (line), 1.5V (Pre out), 12V (Pre out Max)
Connections
CD
Connector: RCA (Phono, Cinch)
Description: Stereo
TUNER
Connector: RCA (Phono, Cinch)
Description: Stereo
TAPE 1
Connector: RCA (Phono, Cinch)
Description: Stereo
TAPE 2
Connector: RCA (Phono, Cinch)
Description: Stereo
TAPE 3
Connector: RCA (Phono, Cinch)
Description: Stereo
CDV 1
Connector: RCA (Phono, Cinch)
Description: Stereo
CDV 2
Connector: RCA (Phono, Cinch)
Description: Stereo
VCR 1
Connector: RCA (Phono, Cinch)
Description: Stereo
VCR 2
Connector: RCA (Phono, Cinch)
Description: Stereo
OUTPUT
Connector: RCA (Phono, Cinch)
Description: Stereo
CD
Connector: JIS F05 (Toslink, ADAT Lightpipe)
DAT 1
Connector: JIS F05 (Toslink, ADAT Lightpipe)
DAT 2
Connector: JIS F05 (Toslink, ADAT Lightpipe)
CDV1
Connector: JIS F05 (Toslink, ADAT Lightpipe)
CDV2
Connector: JIS F05 (Toslink, ADAT Lightpipe)
Remote Control:Tape
Connector: Other
Remote Control:Tuner
Connector: Other
Remote Control:Phono
Connector: Other
Ground
Connector: Terminal Block
Accsessory Send/Recieve
Connector: JIS F05 (Toslink, ADAT Lightpipe)

Comments

There are no comments... Yet!
Login or Register to post a comment