MXR

Model 126 Flanger/Doubler

Effect

Main Details
Maker MXR Company
Function
Channels/Tracks
  • 1 x mono Channel
Form Factor 19" Rackmount
Signal Path Analog Hardware
Made In USA
Dimensions 480 x 89 x 157 mm (W x H x D) + 20 mm knobs
Power Source 110-125 V AC, 50-60 Hz, 103 ma, 12.9 W (captive mains lead)
Notes Uses 1 x Reticon R5101 (unobtainium) and 1 x SAD1024A (rare) bucket brigade delay ICs.
Displays/Indicators
Power LED LED On/off
Manual Max LED Pulses on/off indicating flanging speed
Manual Min LED Pulses off/on indicating flanging speed
Bypass LED On/off
Connections
Line in (front panel) 1/4" Phone Jack (6.35mm) Unbalanced
Line out (front panel) 1/4" Phone Jack (6.35mm) Unbalanced
Line in (rear panel) 1/4" Phone Jack (6.35mm) Unbalanced
Line out (rear panel) 1/4" Phone Jack (6.35mm) Unbalanced
Bypass (footswitch) 1/4" Phone Jack (6.35mm) Unbalanced
Voltage Control In 1/4" Phone Jack (6.35mm) Unbalanced
Voltage Control Out 1/4" Phone Jack (6.35mm) Unbalanced
Controls
Power switch Latching Push Switch
Effect type Latching Push Switch Flanger / Doubler
Manual Rotary Pot Max to Min
Sweep Width Rotary Pot 0 to 100%
Sweep Speed Rotary Pot 1 to 10 Hz
Mix Rotary Pot Dry to Delay
Regeneration Rotary Pot 0 to 100%
Invert Polarity Latching Push Switch Normal / Inverse
Bypass Latching Push Switch In / Out

Comments

There are no comments... Yet!
Login or Register to post a comment on this .