Amplifier, Integrated, Radio Receiver

Main Details
Maker Realistic Brand Radio Shack Company
Additional Model ID AM/FM Stereo Reciever
  • 2 Channel
Form Factor Desktop
Signal Path Analog Hardware
Made In Singapore
Date Produced 1979-80
Dimensions 5.875" x 19.25" x 14.5"
Power Source 120v AC
Frequency Response 30-20,000 Hz ±1 dB
Notes From the 1979 Radio Shack catalog: This high-fidelity receiver comes on as strong as its dramatic, bronze finished contemporary styling! Dual-gate MOSFET FM and PLL multiplex for superior FM. 25/75 microsecond de-emphasis switch lets you enjoy correctly equalized sound from any FM broadcast. Dolby for standard - a must for recording Dolbyized stereo. Deluxe taping facilities lets you record on three decks at once and dub from one to two other, Signal strength and center-channel meters help you tune for lowest total harmonic distortion. Main/remote speaker switching, mono switch, headphone jack, bass and treble controls, 70 and 300-ohm FM antenna inputs. U.L. listed. Includes Custom Walnut Veneer Case.

Original MSRP: $399.95
Additional Specifications
Power Output (WPC) 45 Minimum RMS at 8 ohms from 20-20,000 Hz
Signal-to-Noise ratio 65 dB (Phono); 80 dB (AUX)
Phono Input Overload 150 mV
FM TUNER Sensitivity (IHF) 2 microvolts (5 dBf)
Capture Ratio 2 dB
Channel Selectivity 50 dB
RF Interference Rejection Rated Excellent
Stereo Separation 40 dB at 1 kHz
Total Harmonic Distortion 0.5% stereo;, 0.3% mono
AM TUNER Sensitivity 250 microvolts/meter for 20 dB S+N/N
Image Rejection 35 dB
Tuning Signal Strength Needle Meter 0, 1, 2, 3, 4, 5
Tuning Needle Meter Weak, Strong, Weak
Tape Monitor In Use Green Light On, Off
Input Selection Red Light AM, FM, PHONO, AUX
FM Stereo Red Light On, Off
Phones 1/4" Phone Jack (6.35mm)
Dub Out 1/4" Phone Jack (6.35mm)
AM Antenna Binding Post
300-ohm FM Antenna Binding Post
75-ohm FM Antenna Binding Post
Phono Ground Binding Post
Phono RCA (Phono, Cinch)
AUX RCA (Phono, Cinch)
Tape Monitor 1 (In) RCA (Phono, Cinch)
Tape Monitor 1 (Out) RCA (Phono, Cinch)
Tape Monitor 2 (In) RCA (Phono, Cinch)
Tape Monitor 2 (Out) RCA (Phono, Cinch)
Speakers A Binding Post
Speakers A RCA (Phono, Cinch)
Speakers B Binding Post
Switched 100W Other
Unswitched 200W Other
Power Latching Push Switch On, Off
Speakers Rotary Switch Out, A, A Rev, B, A+B
Lo Fil (70 Hz) Latching Push Switch On, Off
Hi Fil (10 kHz) Latching Push Switch On, Off
Bass Rotary Pot -4, -3, -2, -1, 0, 1, 2, 3, 4
Treble Rotary Pot -4, -3, -2, -1, 0, 1, 2, 3, 4
Tape Dubbing Toggle Switch 1>2, 2>1
Tape Monitor Toggle Switch 1, 2
Volume Rotary Pot
Balance Rotary Pot Left, Center, Right
Loudness Latching Push Switch On, Off
FM 25 μS Latching Push Switch On, Off
Mono Latching Push Switch On, Off
Tuning Rotary Pot FM: 87-108 MHz; AM: 530-1700 kHz
Selector Rotary Switch AM, FM, FM Mute, Phono, AUX


There are no comments... Yet!
Login or Register to post a comment