Amplifier, Integrated, Receiver

Main Details
Maker Pioneer Brand
Signal Path Analog Hardware
Made In Japan
Date Produced 1976-1978
Dimensions 480 x 149 x 371 mm (18.9 x 5.9 x 14.6 in.)
Weight 13.7 kg (30.2 lb)
Power Source 50 watts per channel into 8Ω (stereo)
Frequency Response 10 Hz to 50 kHz
Notes Walnut grained vinyl top panel and side panels are used in the construction of this cabinet.
Additional Specifications
Total Harmonic Distortion 0.1%
Damping Factor 30
Input Sensitivity 5mV (mic), 2.5mV (MM), 150mV (DIN), 150mV (line)
Signal to Noise Ratio 70dB (MM), 90dB (line)
Output 150mV (line), 30mV (DIN)
Speaker Load Impedance 4Ω (minimum)
Signal Strenght Meter
Center Tuning Meter
A Speaker Terminals (Left, Right) Spring Terminal Stereo
B Speaker Terminals (Left, Right) Spring Terminal Stereo
Phono Input RCA (Phono, Cinch) Stereo
Auxiliary Input RCA (Phono, Cinch) Stereo
Tape 1 Record (Output) RCA (Phono, Cinch) Stereo
Tape 1 Play (Input) RCA (Phono, Cinch) Stereo
Tape 2 Record (Output) RCA (Phono, Cinch) Stereo
Tape 2 Play (Input) RCA (Phono, Cinch) Stereo
Tape 2 Record/Play DIN Stereo
Switched Accessory AC Outlet Other
Unswitched Accessory AC Outlet Other
Headphones 1/4" Phone Jack (6.35mm)
Microphone 1/4" Phone Jack (6.35mm)
Speakers Switch Rotary Switch Power Off, A, Speakers Off, B, A + B
Bass Rotary Pot -5 to +5
Treble Rotary Pot -5 to +5
Tone Toggle Switch Off, On
High Filter Toggle Switch Off, 8 KHz
Balance Rotary Pot
Volume Rotary Pot
Loudness Toggle Switch Off, On
Mode Toggle Switch Stereo, Mono
Duplicate Toggle Switch Off, On
Tape Monitor Toggle Switch 2, Off, 1
Function Rotary Switch AM, FM, Phono, Aux/Mic
FM Muting Latching Push Switch Off, On
Tuning Knob


There are no comments... Yet!
Login or Register to post a comment