Pioneer

RT-1020L

Tape Machine

Main Details
Maker Pioneer Brand
Function
Channels/Tracks
  • 4 × Track
  • 2 × Channel (Two channel record and playback)
  • 4 × Channel (Four channel playback)
Signal Path Analog Hardware
Made In Japan
Date Produced 1974-1977
Dimensions 440 x 431 x 225 mm (17.3 x 17.0 x 8.9 in.)
Weight 21 kg (46.3 lb)
Frequency Response 40Hz to 20kHz (7 1⁄2 ips)
Additional Specifications
Heads 1 x Playback, 1 x Record, 1 x Erase
Motor 2 x Reel, 1 x Capstan
Reel Size Up to 10.5 in.
Tape Speeds 3 3⁄4, 7 1⁄2 ips
Wow and Flutter 0.08% (7 1⁄2 ips)
Signal to Noise Ratio 55 dB
Total Harmonic Distortion 1%
Crosstalk 60 dB
Input 50mV (line), 15mV (DIN), 0.25mV (mic)
Output 0.3V (line)
Displays/Indicators
Level Meters
Tape Counter
Connections
AC Power In Other
Ground Terminal Binding Post
Rec/PB Connector DIN
Input (Record) RCA (Phono, Cinch)
Output RCA (Phono, Cinch) Mono, Stereo
Microphone Input (2 x) 1/4" Phone Jack (6.35mm)
Headphone 1/4" Phone Jack (6.35mm)
Controls
Parameter: Pause
Control Type: Toggle Switch
Range: Off, On
Parameter: Power
Control Type: Latching Push Switch
Range: Off, On
Parameter: Reel Size
Control Type: Latching Push Switch
Range: 7-inch, 10.5-inch
Parameter: Record
Control Type: Latching Push Switch
Range: Off, On
Parameter: Rewind
Control Type: Latching Push Switch
Range: Off, On
Parameter: Stop
Control Type: Momentary Push Switch
Parameter: Play
Control Type: Latching Push Switch
Range: Off, On
Parameter: Fast Forward
Control Type: Latching Push Switch
Range: Off, On
Parameter: Tape Speed
Control Type: Latching Push Switch
Range: LO (3 3⁄4 ips), HI (7 1⁄2 ips)
Parameter: Mic Recording Level
Control Type: Rotary Pot
Parameter: Line Recording Level
Control Type: Rotary Pot
Parameter: Recording Equalizer Switch
Control Type: Rotary Switch
Range: STD, LH
Parameter: Recording Bias Switch
Control Type: Rotary Switch
Range: STD, LH1, LH2
Parameter: Output Level Control
Control Type: Rotary Pot
Range: Inner Knob: Front (Ch.1, Ch.3), Outer Knob: Rear (Ch.2, Ch.4)

Comments

There are no comments... Yet!
Login or Register to post a comment